Struct HSplitContainer

#[repr(C)]
pub struct HSplitContainer { /* private fields */ }

Expand description

Godot class HSplitContainer.

Inherits SplitContainer.

Related symbols:

IHSplitContainer: virtual methods

§Construction

This class is manually managed. You can create a new instance using HSplitContainer::new_alloc().

Do not forget to call free() or hand over ownership to Godot.

Methods from Deref<Target = SplitContainer>§

pub fn set_split_offset(&mut self, offset: i32)

pub fn get_split_offset(&self) -> i32

pub fn clamp_split_offset(&mut self)

pub fn set_collapsed(&mut self, collapsed: bool)

pub fn is_collapsed(&self) -> bool

pub fn set_dragger_visibility(&mut self, mode: DraggerVisibility)

pub fn get_dragger_visibility(&self) -> DraggerVisibility

pub fn set_vertical(&mut self, vertical: bool)

pub fn is_vertical(&self) -> bool

Methods from Deref<Target = Container>§

pub fn queue_sort(&mut self)

pub fn fit_child_in_rect( &mut self, child: impl AsObjectArg<Control>, rect: Rect2, )

pub fn notify(&mut self, what: ContainerNotification)

⚠️ Sends a Godot notification to all classes inherited by the object.

Triggers calls to on_notification(), and depending on the notification, also to Godot’s lifecycle callbacks such as ready().

Starts from the highest ancestor (the Object class) and goes down the hierarchy. See also Godot docs for Object::notification().

§Panics

If you call this method on a user-defined object while holding a GdRef or GdMut guard on the instance, you will encounter a panic. The reason is that the receiving virtual method on_notification() acquires a GdMut lock dynamically, which must be exclusive.

pub fn notify_reversed(&mut self, what: ContainerNotification)

⚠️ Like Self::notify(), but starts at the most-derived class and goes up the hierarchy.

See docs of that method, including the panics.

Methods from Deref<Target = Control>§

pub fn accept_event(&mut self)

pub fn get_minimum_size(&self) -> Vector2

pub fn get_combined_minimum_size(&self) -> Vector2

pub fn set_anchors_preset(&mut self, preset: LayoutPreset)

To set the default parameters, use Self::set_anchors_preset_ex and its builder methods. See the book for detailed usage instructions.

pub fn set_anchors_preset_ex<'a>( &'a mut self, preset: LayoutPreset, ) -> ExSetAnchorsPreset<'a>

pub fn set_offsets_preset(&mut self, preset: LayoutPreset)

To set the default parameters, use Self::set_offsets_preset_ex and its builder methods. See the book for detailed usage instructions.

pub fn set_offsets_preset_ex<'a>( &'a mut self, preset: LayoutPreset, ) -> ExSetOffsetsPreset<'a>

pub fn set_anchors_and_offsets_preset(&mut self, preset: LayoutPreset)

To set the default parameters, use Self::set_anchors_and_offsets_preset_ex and its builder methods. See the book for detailed usage instructions.

pub fn set_anchors_and_offsets_preset_ex<'a>( &'a mut self, preset: LayoutPreset, ) -> ExSetAnchorsAndOffsetsPreset<'a>

pub fn set_anchor(&mut self, side: Side, anchor: f32)

To set the default parameters, use Self::set_anchor_ex and its builder methods. See the book for detailed usage instructions.

pub fn set_anchor_ex<'a>( &'a mut self, side: Side, anchor: f32, ) -> ExSetAnchor<'a>

pub fn get_anchor(&self, side: Side) -> f32

pub fn set_offset(&mut self, side: Side, offset: f32)

pub fn get_offset(&self, offset: Side) -> f32

pub fn set_anchor_and_offset(&mut self, side: Side, anchor: f32, offset: f32)

To set the default parameters, use Self::set_anchor_and_offset_ex and its builder methods. See the book for detailed usage instructions.

pub fn set_anchor_and_offset_ex<'a>( &'a mut self, side: Side, anchor: f32, offset: f32, ) -> ExSetAnchorAndOffset<'a>

pub fn set_begin(&mut self, position: Vector2)

pub fn set_end(&mut self, position: Vector2)

pub fn set_position(&mut self, position: Vector2)

To set the default parameters, use Self::set_position_ex and its builder methods. See the book for detailed usage instructions.

pub fn set_position_ex<'a>(&'a mut self, position: Vector2) -> ExSetPosition<'a>

pub fn set_size(&mut self, size: Vector2)

To set the default parameters, use Self::set_size_ex and its builder methods. See the book for detailed usage instructions.

pub fn set_size_ex<'a>(&'a mut self, size: Vector2) -> ExSetSize<'a>

pub fn reset_size(&mut self)

pub fn set_custom_minimum_size(&mut self, size: Vector2)

pub fn set_global_position(&mut self, position: Vector2)

To set the default parameters, use Self::set_global_position_ex and its builder methods. See the book for detailed usage instructions.

pub fn set_global_position_ex<'a>( &'a mut self, position: Vector2, ) -> ExSetGlobalPosition<'a>

pub fn set_rotation(&mut self, radians: f32)

pub fn set_rotation_degrees(&mut self, degrees: f32)

pub fn set_scale(&mut self, scale: Vector2)

pub fn set_pivot_offset(&mut self, pivot_offset: Vector2)

pub fn get_begin(&self) -> Vector2

pub fn get_end(&self) -> Vector2

pub fn get_position(&self) -> Vector2

pub fn get_size(&self) -> Vector2

pub fn get_rotation(&self) -> f32

pub fn get_rotation_degrees(&self) -> f32

pub fn get_scale(&self) -> Vector2

pub fn get_pivot_offset(&self) -> Vector2

pub fn get_custom_minimum_size(&self) -> Vector2

pub fn get_parent_area_size(&self) -> Vector2

pub fn get_global_position(&self) -> Vector2

pub fn get_screen_position(&self) -> Vector2

pub fn get_rect(&self) -> Rect2

pub fn get_global_rect(&self) -> Rect2

pub fn set_focus_mode(&mut self, mode: FocusMode)

pub fn get_focus_mode(&self) -> FocusMode

pub fn has_focus(&self) -> bool

pub fn grab_focus(&mut self)

pub fn release_focus(&mut self)

pub fn find_prev_valid_focus(&self) -> Option<Gd<Control>>

pub fn find_next_valid_focus(&self) -> Option<Gd<Control>>

pub fn find_valid_focus_neighbor(&self, side: Side) -> Option<Gd<Control>>

pub fn set_h_size_flags(&mut self, flags: SizeFlags)

pub fn get_h_size_flags(&self) -> SizeFlags

pub fn set_stretch_ratio(&mut self, ratio: f32)

pub fn get_stretch_ratio(&self) -> f32

pub fn set_v_size_flags(&mut self, flags: SizeFlags)

pub fn get_v_size_flags(&self) -> SizeFlags

pub fn set_theme(&mut self, theme: impl AsObjectArg<Theme>)

pub fn get_theme(&self) -> Option<Gd<Theme>>

pub fn set_theme_type_variation(&mut self, theme_type: impl AsArg<StringName>)

pub fn get_theme_type_variation(&self) -> StringName

pub fn begin_bulk_theme_override(&mut self)

pub fn end_bulk_theme_override(&mut self)

pub fn add_theme_icon_override( &mut self, name: impl AsArg<StringName>, texture: impl AsObjectArg<Texture2D>, )

pub fn add_theme_stylebox_override( &mut self, name: impl AsArg<StringName>, stylebox: impl AsObjectArg<StyleBox>, )

pub fn add_theme_font_override( &mut self, name: impl AsArg<StringName>, font: impl AsObjectArg, )

pub fn add_theme_font_size_override( &mut self, name: impl AsArg<StringName>, font_size: i32, )

pub fn add_theme_color_override( &mut self, name: impl AsArg<StringName>, color: Color, )

pub fn add_theme_constant_override( &mut self, name: impl AsArg<StringName>, constant: i32, )

pub fn remove_theme_icon_override(&mut self, name: impl AsArg<StringName>)

pub fn remove_theme_stylebox_override(&mut self, name: impl AsArg<StringName>)

pub fn remove_theme_font_override(&mut self, name: impl AsArg<StringName>)

pub fn remove_theme_font_size_override(&mut self, name: impl AsArg<StringName>)

pub fn remove_theme_color_override(&mut self, name: impl AsArg<StringName>)

pub fn remove_theme_constant_override(&mut self, name: impl AsArg<StringName>)

pub fn get_theme_icon( &self, name: impl AsArg<StringName>, ) -> Option<Gd<Texture2D>>

To set the default parameters, use Self::get_theme_icon_ex and its builder methods. See the book for detailed usage instructions.

pub fn get_theme_icon_ex<'a>( &'a self, name: impl AsArg<StringName> + 'a, ) -> ExGetThemeIcon<'a>

pub fn get_theme_stylebox( &self, name: impl AsArg<StringName>, ) -> Option<Gd<StyleBox>>

To set the default parameters, use Self::get_theme_stylebox_ex and its builder methods. See the book for detailed usage instructions.

pub fn get_theme_stylebox_ex<'a>( &'a self, name: impl AsArg<StringName> + 'a, ) -> ExGetThemeStylebox<'a>

pub fn get_theme_font(&self, name: impl AsArg<StringName>) -> Option<Gd>

To set the default parameters, use Self::get_theme_font_ex and its builder methods. See the book for detailed usage instructions.

pub fn get_theme_font_ex<'a>( &'a self, name: impl AsArg<StringName> + 'a, ) -> ExGetThemeFont<'a>

pub fn get_theme_font_size(&self, name: impl AsArg<StringName>) -> i32

To set the default parameters, use Self::get_theme_font_size_ex and its builder methods. See the book for detailed usage instructions.

pub fn get_theme_font_size_ex<'a>( &'a self, name: impl AsArg<StringName> + 'a, ) -> ExGetThemeFontSize<'a>

pub fn get_theme_color(&self, name: impl AsArg<StringName>) -> Color

To set the default parameters, use Self::get_theme_color_ex and its builder methods. See the book for detailed usage instructions.

pub fn get_theme_color_ex<'a>( &'a self, name: impl AsArg<StringName> + 'a, ) -> ExGetThemeColor<'a>

pub fn get_theme_constant(&self, name: impl AsArg<StringName>) -> i32

To set the default parameters, use Self::get_theme_constant_ex and its builder methods. See the book for detailed usage instructions.

pub fn get_theme_constant_ex<'a>( &'a self, name: impl AsArg<StringName> + 'a, ) -> ExGetThemeConstant<'a>

pub fn has_theme_icon_override(&self, name: impl AsArg<StringName>) -> bool

pub fn has_theme_stylebox_override(&self, name: impl AsArg<StringName>) -> bool

pub fn has_theme_font_override(&self, name: impl AsArg<StringName>) -> bool

pub fn has_theme_font_size_override(&self, name: impl AsArg<StringName>) -> bool

pub fn has_theme_color_override(&self, name: impl AsArg<StringName>) -> bool

pub fn has_theme_constant_override(&self, name: impl AsArg<StringName>) -> bool

pub fn has_theme_icon(&self, name: impl AsArg<StringName>) -> bool

To set the default parameters, use Self::has_theme_icon_ex and its builder methods. See the book for detailed usage instructions.

pub fn has_theme_icon_ex<'a>( &'a self, name: impl AsArg<StringName> + 'a, ) -> ExHasThemeIcon<'a>

pub fn has_theme_stylebox(&self, name: impl AsArg<StringName>) -> bool

To set the default parameters, use Self::has_theme_stylebox_ex and its builder methods. See the book for detailed usage instructions.

pub fn has_theme_stylebox_ex<'a>( &'a self, name: impl AsArg<StringName> + 'a, ) -> ExHasThemeStylebox<'a>

pub fn has_theme_font(&self, name: impl AsArg<StringName>) -> bool

To set the default parameters, use Self::has_theme_font_ex and its builder methods. See the book for detailed usage instructions.

pub fn has_theme_font_ex<'a>( &'a self, name: impl AsArg<StringName> + 'a, ) -> ExHasThemeFont<'a>

pub fn has_theme_font_size(&self, name: impl AsArg<StringName>) -> bool

To set the default parameters, use Self::has_theme_font_size_ex and its builder methods. See the book for detailed usage instructions.

pub fn has_theme_font_size_ex<'a>( &'a self, name: impl AsArg<StringName> + 'a, ) -> ExHasThemeFontSize<'a>

pub fn has_theme_color(&self, name: impl AsArg<StringName>) -> bool

To set the default parameters, use Self::has_theme_color_ex and its builder methods. See the book for detailed usage instructions.

pub fn has_theme_color_ex<'a>( &'a self, name: impl AsArg<StringName> + 'a, ) -> ExHasThemeColor<'a>

pub fn has_theme_constant(&self, name: impl AsArg<StringName>) -> bool

To set the default parameters, use Self::has_theme_constant_ex and its builder methods. See the book for detailed usage instructions.

pub fn has_theme_constant_ex<'a>( &'a self, name: impl AsArg<StringName> + 'a, ) -> ExHasThemeConstant<'a>

pub fn get_theme_default_base_scale(&self) -> f32

pub fn get_theme_default_font(&self) -> Option<Gd>

pub fn get_theme_default_font_size(&self) -> i32

pub fn get_parent_control(&self) -> Option<Gd<Control>>

pub fn set_h_grow_direction(&mut self, direction: GrowDirection)

pub fn get_h_grow_direction(&self) -> GrowDirection

pub fn set_v_grow_direction(&mut self, direction: GrowDirection)

pub fn get_v_grow_direction(&self) -> GrowDirection

To set the default parameters, use Self::get_tooltip_ex and its builder methods. See the book for detailed usage instructions.

pub fn set_default_cursor_shape(&mut self, shape: CursorShape)

pub fn get_default_cursor_shape(&self) -> CursorShape

pub fn get_cursor_shape(&self) -> CursorShape

To set the default parameters, use Self::get_cursor_shape_ex and its builder methods. See the book for detailed usage instructions.

pub fn get_cursor_shape_ex<'a>(&'a self) -> ExGetCursorShape<'a>

pub fn set_focus_neighbor(&mut self, side: Side, neighbor: impl AsArg<NodePath>)

pub fn get_focus_neighbor(&self, side: Side) -> NodePath

pub fn set_focus_next(&mut self, next: impl AsArg<NodePath>)

pub fn get_focus_next(&self) -> NodePath

pub fn set_focus_previous(&mut self, previous: impl AsArg<NodePath>)

pub fn get_focus_previous(&self) -> NodePath

pub fn force_drag(&mut self, data: &Variant, preview: impl AsObjectArg<Control>)

pub fn set_mouse_filter(&mut self, filter: MouseFilter)

pub fn get_mouse_filter(&self) -> MouseFilter

pub fn set_force_pass_scroll_events(&mut self, force_pass_scroll_events: bool)

pub fn is_force_pass_scroll_events(&self) -> bool

pub fn set_clip_contents(&mut self, enable: bool)

pub fn is_clipping_contents(&mut self) -> bool

pub fn grab_click_focus(&mut self)

pub fn set_drag_forwarding( &mut self, drag_func: &Callable, can_drop_func: &Callable, drop_func: &Callable, )

pub fn set_drag_preview(&mut self, control: impl AsObjectArg<Control>)

pub fn is_drag_successful(&self) -> bool

pub fn warp_mouse(&mut self, position: Vector2)

pub fn set_shortcut_context(&mut self, node: impl AsObjectArg<Node>)

pub fn get_shortcut_context(&self) -> Option<Gd<Node>>

pub fn update_minimum_size(&mut self)

pub fn set_layout_direction(&mut self, direction: LayoutDirection)

pub fn get_layout_direction(&self) -> LayoutDirection

pub fn is_layout_rtl(&self) -> bool

pub fn set_auto_translate(&mut self, enable: bool)

pub fn is_auto_translating(&self) -> bool

pub fn set_localize_numeral_system(&mut self, enable: bool)

pub fn is_localizing_numeral_system(&self) -> bool

pub fn notify(&mut self, what: ControlNotification)

⚠️ Sends a Godot notification to all classes inherited by the object.

Triggers calls to on_notification(), and depending on the notification, also to Godot’s lifecycle callbacks such as ready().

Starts from the highest ancestor (the Object class) and goes down the hierarchy. See also Godot docs for Object::notification().

§Panics

If you call this method on a user-defined object while holding a GdRef or GdMut guard on the instance, you will encounter a panic. The reason is that the receiving virtual method on_notification() acquires a GdMut lock dynamically, which must be exclusive.

pub fn notify_reversed(&mut self, what: ControlNotification)

⚠️ Like Self::notify(), but starts at the most-derived class and goes up the hierarchy.

See docs of that method, including the panics.

Methods from Deref<Target = CanvasItem>§

pub fn get_canvas_item(&self) -> Rid

pub fn set_visible(&mut self, visible: bool)

pub fn is_visible(&self) -> bool

pub fn is_visible_in_tree(&self) -> bool

pub fn show(&mut self)

pub fn hide(&mut self)

pub fn queue_redraw(&mut self)

pub fn move_to_front(&mut self)

pub fn set_as_top_level(&mut self, enable: bool)

pub fn is_set_as_top_level(&self) -> bool

pub fn set_light_mask(&mut self, light_mask: i32)

pub fn get_light_mask(&self) -> i32

pub fn set_modulate(&mut self, modulate: Color)

pub fn get_modulate(&self) -> Color

pub fn set_self_modulate(&mut self, self_modulate: Color)

pub fn get_self_modulate(&self) -> Color

pub fn set_z_index(&mut self, z_index: i32)

pub fn get_z_index(&self) -> i32

pub fn set_z_as_relative(&mut self, enable: bool)

pub fn is_z_relative(&self) -> bool

pub fn set_y_sort_enabled(&mut self, enabled: bool)

pub fn is_y_sort_enabled(&self) -> bool

pub fn set_draw_behind_parent(&mut self, enable: bool)

pub fn is_draw_behind_parent_enabled(&self) -> bool

pub fn draw_line(&mut self, from: Vector2, to: Vector2, color: Color)

To set the default parameters, use Self::draw_line_ex and its builder methods. See the book for detailed usage instructions.

pub fn draw_line_ex<'a>( &'a mut self, from: Vector2, to: Vector2, color: Color, ) -> ExDrawLine<'a>

pub fn draw_dashed_line(&mut self, from: Vector2, to: Vector2, color: Color)

To set the default parameters, use Self::draw_dashed_line_ex and its builder methods. See the book for detailed usage instructions.

pub fn draw_dashed_line_ex<'a>( &'a mut self, from: Vector2, to: Vector2, color: Color, ) -> ExDrawDashedLine<'a>

pub fn draw_polyline(&mut self, points: &PackedVector2Array, color: Color)

To set the default parameters, use Self::draw_polyline_ex and its builder methods. See the book for detailed usage instructions.

pub fn draw_polyline_ex<'a>( &'a mut self, points: &'a PackedVector2Array, color: Color, ) -> ExDrawPolyline<'a>

pub fn draw_polyline_colors( &mut self, points: &PackedVector2Array, colors: &PackedColorArray, )

To set the default parameters, use Self::draw_polyline_colors_ex and its builder methods. See the book for detailed usage instructions.

pub fn draw_polyline_colors_ex<'a>( &'a mut self, points: &'a PackedVector2Array, colors: &'a PackedColorArray, ) -> ExDrawPolylineColors<'a>

pub fn draw_arc( &mut self, center: Vector2, radius: f32, start_angle: f32, end_angle: f32, point_count: i32, color: Color, )

To set the default parameters, use Self::draw_arc_ex and its builder methods. See the book for detailed usage instructions.

pub fn draw_arc_ex<'a>( &'a mut self, center: Vector2, radius: f32, start_angle: f32, end_angle: f32, point_count: i32, color: Color, ) -> ExDrawArc<'a>

pub fn draw_multiline(&mut self, points: &PackedVector2Array, color: Color)

To set the default parameters, use Self::draw_multiline_ex and its builder methods. See the book for detailed usage instructions.

pub fn draw_multiline_ex<'a>( &'a mut self, points: &'a PackedVector2Array, color: Color, ) -> ExDrawMultiline<'a>

pub fn draw_multiline_colors( &mut self, points: &PackedVector2Array, colors: &PackedColorArray, )

To set the default parameters, use Self::draw_multiline_colors_ex and its builder methods. See the book for detailed usage instructions.

pub fn draw_multiline_colors_ex<'a>( &'a mut self, points: &'a PackedVector2Array, colors: &'a PackedColorArray, ) -> ExDrawMultilineColors<'a>

pub fn draw_rect(&mut self, rect: Rect2, color: Color)

To set the default parameters, use Self::draw_rect_ex and its builder methods. See the book for detailed usage instructions.

pub fn draw_rect_ex<'a>( &'a mut self, rect: Rect2, color: Color, ) -> ExDrawRect<'a>

pub fn draw_circle(&mut self, position: Vector2, radius: f32, color: Color)

To set the default parameters, use Self::draw_circle_ex and its builder methods. See the book for detailed usage instructions.

pub fn draw_circle_ex<'a>( &'a mut self, position: Vector2, radius: f32, color: Color, ) -> ExDrawCircle<'a>

pub fn draw_texture( &mut self, texture: impl AsObjectArg<Texture2D>, position: Vector2, )

To set the default parameters, use Self::draw_texture_ex and its builder methods. See the book for detailed usage instructions.

pub fn draw_texture_ex<'a>( &'a mut self, texture: impl AsObjectArg<Texture2D>, position: Vector2, ) -> ExDrawTexture<'a>

pub fn draw_texture_rect( &mut self, texture: impl AsObjectArg<Texture2D>, rect: Rect2, tile: bool, )

To set the default parameters, use Self::draw_texture_rect_ex and its builder methods. See the book for detailed usage instructions.

pub fn draw_texture_rect_ex<'a>( &'a mut self, texture: impl AsObjectArg<Texture2D>, rect: Rect2, tile: bool, ) -> ExDrawTextureRect<'a>

pub fn draw_texture_rect_region( &mut self, texture: impl AsObjectArg<Texture2D>, rect: Rect2, src_rect: Rect2, )

To set the default parameters, use Self::draw_texture_rect_region_ex and its builder methods. See the book for detailed usage instructions.

pub fn draw_texture_rect_region_ex<'a>( &'a mut self, texture: impl AsObjectArg<Texture2D>, rect: Rect2, src_rect: Rect2, ) -> ExDrawTextureRectRegion<'a>

pub fn draw_msdf_texture_rect_region( &mut self, texture: impl AsObjectArg<Texture2D>, rect: Rect2, src_rect: Rect2, )

To set the default parameters, use Self::draw_msdf_texture_rect_region_ex and its builder methods. See the book for detailed usage instructions.

pub fn draw_msdf_texture_rect_region_ex<'a>( &'a mut self, texture: impl AsObjectArg<Texture2D>, rect: Rect2, src_rect: Rect2, ) -> ExDrawMsdfTextureRectRegion<'a>

pub fn draw_lcd_texture_rect_region( &mut self, texture: impl AsObjectArg<Texture2D>, rect: Rect2, src_rect: Rect2, )

To set the default parameters, use Self::draw_lcd_texture_rect_region_ex and its builder methods. See the book for detailed usage instructions.

pub fn draw_lcd_texture_rect_region_ex<'a>( &'a mut self, texture: impl AsObjectArg<Texture2D>, rect: Rect2, src_rect: Rect2, ) -> ExDrawLcdTextureRectRegion<'a>

pub fn draw_style_box( &mut self, style_box: impl AsObjectArg<StyleBox>, rect: Rect2, )

pub fn draw_primitive( &mut self, points: &PackedVector2Array, colors: &PackedColorArray, uvs: &PackedVector2Array, )

To set the default parameters, use Self::draw_primitive_ex and its builder methods. See the book for detailed usage instructions.

pub fn draw_primitive_ex<'a>( &'a mut self, points: &'a PackedVector2Array, colors: &'a PackedColorArray, uvs: &'a PackedVector2Array, ) -> ExDrawPrimitive<'a>

pub fn draw_polygon( &mut self, points: &PackedVector2Array, colors: &PackedColorArray, )

To set the default parameters, use Self::draw_polygon_ex and its builder methods. See the book for detailed usage instructions.

pub fn draw_polygon_ex<'a>( &'a mut self, points: &'a PackedVector2Array, colors: &'a PackedColorArray, ) -> ExDrawPolygon<'a>

pub fn draw_colored_polygon( &mut self, points: &PackedVector2Array, color: Color, )

To set the default parameters, use Self::draw_colored_polygon_ex and its builder methods. See the book for detailed usage instructions.

pub fn draw_colored_polygon_ex<'a>( &'a mut self, points: &'a PackedVector2Array, color: Color, ) -> ExDrawColoredPolygon<'a>

pub fn draw_string( &self, font: impl AsObjectArg, pos: Vector2, text: impl AsArg<GString>, )

To set the default parameters, use Self::draw_string_ex and its builder methods. See the book for detailed usage instructions.

pub fn draw_string_ex<'a>( &'a self, font: impl AsObjectArg, pos: Vector2, text: impl AsArg<GString> + 'a, ) -> ExDrawString<'a>

pub fn draw_multiline_string( &self, font: impl AsObjectArg, pos: Vector2, text: impl AsArg<GString>, )

To set the default parameters, use Self::draw_multiline_string_ex and its builder methods. See the book for detailed usage instructions.

pub fn draw_multiline_string_ex<'a>( &'a self, font: impl AsObjectArg, pos: Vector2, text: impl AsArg<GString> + 'a, ) -> ExDrawMultilineString<'a>

pub fn draw_string_outline( &self, font: impl AsObjectArg, pos: Vector2, text: impl AsArg<GString>, )

To set the default parameters, use Self::draw_string_outline_ex and its builder methods. See the book for detailed usage instructions.

pub fn draw_string_outline_ex<'a>( &'a self, font: impl AsObjectArg, pos: Vector2, text: impl AsArg<GString> + 'a, ) -> ExDrawStringOutline<'a>

pub fn draw_multiline_string_outline( &self, font: impl AsObjectArg, pos: Vector2, text: impl AsArg<GString>, )

To set the default parameters, use Self::draw_multiline_string_outline_ex and its builder methods. See the book for detailed usage instructions.

pub fn draw_multiline_string_outline_ex<'a>( &'a self, font: impl AsObjectArg, pos: Vector2, text: impl AsArg<GString> + 'a, ) -> ExDrawMultilineStringOutline<'a>

pub fn draw_char( &self, font: impl AsObjectArg, pos: Vector2, char: impl AsArg<GString>, )

To set the default parameters, use Self::draw_char_ex and its builder methods. See the book for detailed usage instructions.

pub fn draw_char_ex<'a>( &'a self, font: impl AsObjectArg, pos: Vector2, char: impl AsArg<GString> + 'a, ) -> ExDrawChar<'a>

pub fn draw_char_outline( &self, font: impl AsObjectArg, pos: Vector2, char: impl AsArg<GString>, )

To set the default parameters, use Self::draw_char_outline_ex and its builder methods. See the book for detailed usage instructions.

pub fn draw_char_outline_ex<'a>( &'a self, font: impl AsObjectArg, pos: Vector2, char: impl AsArg<GString> + 'a, ) -> ExDrawCharOutline<'a>

pub fn draw_mesh( &mut self, mesh: impl AsObjectArg<Mesh>, texture: impl AsObjectArg<Texture2D>, )

To set the default parameters, use Self::draw_mesh_ex and its builder methods. See the book for detailed usage instructions.

pub fn draw_mesh_ex<'a>( &'a mut self, mesh: impl AsObjectArg<Mesh>, texture: impl AsObjectArg<Texture2D>, ) -> ExDrawMesh<'a>

pub fn draw_multimesh( &mut self, multimesh: impl AsObjectArg<MultiMesh>, texture: impl AsObjectArg<Texture2D>, )

pub fn draw_set_transform(&mut self, position: Vector2)

To set the default parameters, use Self::draw_set_transform_ex and its builder methods. See the book for detailed usage instructions.

pub fn draw_set_transform_ex<'a>( &'a mut self, position: Vector2, ) -> ExDrawSetTransform<'a>

pub fn draw_set_transform_matrix(&mut self, xform: Transform2D)

pub fn draw_animation_slice( &mut self, animation_length: f64, slice_begin: f64, slice_end: f64, )

To set the default parameters, use Self::draw_animation_slice_ex and its builder methods. See the book for detailed usage instructions.

pub fn draw_animation_slice_ex<'a>( &'a mut self, animation_length: f64, slice_begin: f64, slice_end: f64, ) -> ExDrawAnimationSlice<'a>

pub fn draw_end_animation(&mut self)

pub fn get_transform(&self) -> Transform2D

pub fn get_global_transform(&self) -> Transform2D

pub fn get_global_transform_with_canvas(&self) -> Transform2D

pub fn get_viewport_transform(&self) -> Transform2D

pub fn get_viewport_rect(&self) -> Rect2

pub fn get_canvas_transform(&self) -> Transform2D

pub fn get_screen_transform(&self) -> Transform2D

pub fn get_local_mouse_position(&self) -> Vector2

pub fn get_global_mouse_position(&self) -> Vector2

pub fn get_canvas(&self) -> Rid

pub fn get_canvas_layer_node(&self) -> Option<Gd<CanvasLayer>>

pub fn get_world_2d(&self) -> Option<Gd<World2D>>

pub fn set_material(&mut self, material: impl AsObjectArg<Material>)

pub fn get_material(&self) -> Option<Gd<Material>>

pub fn set_use_parent_material(&mut self, enable: bool)

pub fn get_use_parent_material(&self) -> bool

pub fn set_notify_local_transform(&mut self, enable: bool)

pub fn is_local_transform_notification_enabled(&self) -> bool

pub fn set_notify_transform(&mut self, enable: bool)

pub fn is_transform_notification_enabled(&self) -> bool

pub fn force_update_transform(&mut self)

pub fn make_canvas_position_local(&self, screen_point: Vector2) -> Vector2

pub fn make_input_local( &self, event: impl AsObjectArg<InputEvent>, ) -> Option<Gd<InputEvent>>

pub fn set_visibility_layer(&mut self, layer: u32)

pub fn get_visibility_layer(&self) -> u32

pub fn set_visibility_layer_bit(&mut self, layer: u32, enabled: bool)

pub fn get_visibility_layer_bit(&self, layer: u32) -> bool

pub fn set_texture_filter(&mut self, mode: TextureFilter)

pub fn get_texture_filter(&self) -> TextureFilter

pub fn set_texture_repeat(&mut self, mode: TextureRepeat)

pub fn get_texture_repeat(&self) -> TextureRepeat

pub fn set_clip_children_mode(&mut self, mode: ClipChildrenMode)

pub fn get_clip_children_mode(&self) -> ClipChildrenMode

pub fn notify(&mut self, what: CanvasItemNotification)

⚠️ Sends a Godot notification to all classes inherited by the object.

Triggers calls to on_notification(), and depending on the notification, also to Godot’s lifecycle callbacks such as ready().

Starts from the highest ancestor (the Object class) and goes down the hierarchy. See also Godot docs for Object::notification().

§Panics

If you call this method on a user-defined object while holding a GdRef or GdMut guard on the instance, you will encounter a panic. The reason is that the receiving virtual method on_notification() acquires a GdMut lock dynamically, which must be exclusive.

pub fn notify_reversed(&mut self, what: CanvasItemNotification)

⚠️ Like Self::notify(), but starts at the most-derived class and goes up the hierarchy.

See docs of that method, including the panics.

Methods from Deref<Target = Node>§

pub fn get_node_as<T>(&self, path: impl AsArg<NodePath>) -> Gd<T>
where T: Inherits<Node>,

⚠️ Retrieves the node at path path, panicking if not found or bad type.

§Panics

If the node is not found, or if it does not have type T or inherited.

pub fn try_get_node_as<T>(&self, path: impl AsArg<NodePath>) -> Option<Gd<T>>
where T: Inherits<Node>,

Retrieves the node at path path (fallible).

If the node is not found, or if it does not have type T or inherited, None will be returned.

pub fn add_sibling(&mut self, sibling: impl AsObjectArg<Node>)

To set the default parameters, use Self::add_sibling_ex and its builder methods. See the book for detailed usage instructions.

pub fn add_sibling_ex<'a>( &'a mut self, sibling: impl AsObjectArg<Node>, ) -> ExAddSibling<'a>

pub fn set_name(&mut self, name: impl AsArg<GString>)

pub fn get_name(&self) -> StringName

pub fn add_child(&mut self, node: impl AsObjectArg<Node>)

To set the default parameters, use Self::add_child_ex and its builder methods. See the book for detailed usage instructions.

pub fn add_child_ex<'a>( &'a mut self, node: impl AsObjectArg<Node>, ) -> ExAddChild<'a>

pub fn remove_child(&mut self, node: impl AsObjectArg<Node>)

pub fn reparent(&mut self, new_parent: impl AsObjectArg<Node>)

To set the default parameters, use Self::reparent_ex and its builder methods. See the book for detailed usage instructions.

pub fn reparent_ex<'a>( &'a mut self, new_parent: impl AsObjectArg<Node>, ) -> ExReparent<'a>

pub fn get_child_count(&self) -> i32

To set the default parameters, use Self::get_child_count_ex and its builder methods. See the book for detailed usage instructions.

pub fn get_child_count_ex<'a>(&'a self) -> ExGetChildCount<'a>

pub fn get_children(&self) -> Array<Gd<Node>>

To set the default parameters, use Self::get_children_ex and its builder methods. See the book for detailed usage instructions.

pub fn get_children_ex<'a>(&'a self) -> ExGetChildren<'a>

pub fn get_child(&self, idx: i32) -> Option<Gd<Node>>

To set the default parameters, use Self::get_child_ex and its builder methods. See the book for detailed usage instructions.

pub fn get_child_ex<'a>(&'a self, idx: i32) -> ExGetChild<'a>

pub fn has_node(&self, path: impl AsArg<NodePath>) -> bool

pub fn get_node_or_null(&self, path: impl AsArg<NodePath>) -> Option<Gd<Node>>

pub fn get_parent(&self) -> Option<Gd<Node>>

pub fn find_child(&self, pattern: impl AsArg<GString>) -> Option<Gd<Node>>

To set the default parameters, use Self::find_child_ex and its builder methods. See the book for detailed usage instructions.

pub fn find_child_ex<'a>( &'a self, pattern: impl AsArg<GString> + 'a, ) -> ExFindChild<'a>

pub fn find_children(&self, pattern: impl AsArg<GString>) -> Array<Gd<Node>>

To set the default parameters, use Self::find_children_ex and its builder methods. See the book for detailed usage instructions.

pub fn find_children_ex<'a>( &'a self, pattern: impl AsArg<GString> + 'a, ) -> ExFindChildren<'a>

pub fn find_parent(&self, pattern: impl AsArg<GString>) -> Option<Gd<Node>>

pub fn has_node_and_resource(&self, path: impl AsArg<NodePath>) -> bool

pub fn get_node_and_resource( &mut self, path: impl AsArg<NodePath>, ) -> Array<Variant>

pub fn is_inside_tree(&self) -> bool

pub fn is_part_of_edited_scene(&self) -> bool

pub fn is_ancestor_of(&self, node: impl AsObjectArg<Node>) -> bool

pub fn is_greater_than(&self, node: impl AsObjectArg<Node>) -> bool

pub fn get_path(&self) -> NodePath

pub fn get_path_to(&self, node: impl AsObjectArg<Node>) -> NodePath

To set the default parameters, use Self::get_path_to_ex and its builder methods. See the book for detailed usage instructions.

pub fn get_path_to_ex<'a>( &'a self, node: impl AsObjectArg<Node>, ) -> ExGetPathTo<'a>

pub fn add_to_group(&mut self, group: impl AsArg<StringName>)

To set the default parameters, use Self::add_to_group_ex and its builder methods. See the book for detailed usage instructions.

pub fn add_to_group_ex<'a>( &'a mut self, group: impl AsArg<StringName> + 'a, ) -> ExAddToGroup<'a>

pub fn remove_from_group(&mut self, group: impl AsArg<StringName>)

pub fn is_in_group(&self, group: impl AsArg<StringName>) -> bool

pub fn move_child(&mut self, child_node: impl AsObjectArg<Node>, to_index: i32)

pub fn get_groups(&self) -> Array<StringName>

pub fn set_owner(&mut self, owner: impl AsObjectArg<Node>)

pub fn get_owner(&self) -> Option<Gd<Node>>

pub fn get_index(&self) -> i32

To set the default parameters, use Self::get_index_ex and its builder methods. See the book for detailed usage instructions.

pub fn get_index_ex<'a>(&'a self) -> ExGetIndex<'a>

pub fn print_tree(&mut self)

pub fn print_tree_pretty(&mut self)

pub fn get_tree_string(&mut self) -> GString

pub fn get_tree_string_pretty(&mut self) -> GString

pub fn set_scene_file_path(&mut self, scene_file_path: impl AsArg<GString>)

pub fn get_scene_file_path(&self) -> GString

pub fn propagate_notification(&mut self, what: i32)

pub fn propagate_call(&mut self, method: impl AsArg<StringName>)

To set the default parameters, use Self::propagate_call_ex and its builder methods. See the book for detailed usage instructions.

pub fn propagate_call_ex<'a>( &'a mut self, method: impl AsArg<StringName> + 'a, ) -> ExPropagateCall<'a>

pub fn set_physics_process(&mut self, enable: bool)

pub fn get_physics_process_delta_time(&self) -> f64

pub fn is_physics_processing(&self) -> bool

pub fn get_process_delta_time(&self) -> f64

pub fn set_process(&mut self, enable: bool)

pub fn set_process_priority(&mut self, priority: i32)

pub fn get_process_priority(&self) -> i32

pub fn set_physics_process_priority(&mut self, priority: i32)

pub fn get_physics_process_priority(&self) -> i32

pub fn is_processing(&self) -> bool

pub fn set_process_input(&mut self, enable: bool)

pub fn is_processing_input(&self) -> bool

pub fn set_process_shortcut_input(&mut self, enable: bool)

pub fn is_processing_shortcut_input(&self) -> bool

pub fn set_process_unhandled_input(&mut self, enable: bool)

pub fn is_processing_unhandled_input(&self) -> bool

pub fn set_process_unhandled_key_input(&mut self, enable: bool)

pub fn is_processing_unhandled_key_input(&self) -> bool

pub fn set_process_mode(&mut self, mode: ProcessMode)

pub fn get_process_mode(&self) -> ProcessMode

pub fn can_process(&self) -> bool

pub fn set_process_thread_group(&mut self, mode: ProcessThreadGroup)

pub fn get_process_thread_group(&self) -> ProcessThreadGroup

pub fn set_process_thread_messages(&mut self, flags: ProcessThreadMessages)

pub fn get_process_thread_messages(&self) -> ProcessThreadMessages

pub fn set_process_thread_group_order(&mut self, order: i32)

pub fn get_process_thread_group_order(&self) -> i32

pub fn set_display_folded(&mut self, fold: bool)

pub fn is_displayed_folded(&self) -> bool

pub fn set_process_internal(&mut self, enable: bool)

pub fn is_processing_internal(&self) -> bool

pub fn set_physics_process_internal(&mut self, enable: bool)

pub fn is_physics_processing_internal(&self) -> bool

pub fn set_physics_interpolation_mode(&mut self, mode: PhysicsInterpolationMode)

pub fn get_physics_interpolation_mode(&self) -> PhysicsInterpolationMode

pub fn is_physics_interpolated(&self) -> bool

pub fn is_physics_interpolated_and_enabled(&self) -> bool

pub fn reset_physics_interpolation(&mut self)

pub fn set_auto_translate_mode(&mut self, mode: AutoTranslateMode)

pub fn get_auto_translate_mode(&self) -> AutoTranslateMode

pub fn get_window(&self) -> Option<Gd<Window>>

pub fn get_last_exclusive_window(&self) -> Option<Gd<Window>>

pub fn get_tree(&self) -> Option<Gd<SceneTree>>

pub fn create_tween(&mut self) -> Option<Gd<Tween>>

pub fn duplicate(&self) -> Option<Gd<Node>>

To set the default parameters, use Self::duplicate_ex and its builder methods. See the book for detailed usage instructions.

pub fn duplicate_ex<'a>(&'a self) -> ExDuplicate<'a>

pub fn replace_by(&mut self, node: impl AsObjectArg<Node>)

To set the default parameters, use Self::replace_by_ex and its builder methods. See the book for detailed usage instructions.

pub fn replace_by_ex<'a>( &'a mut self, node: impl AsObjectArg<Node>, ) -> ExReplaceBy<'a>

pub fn set_scene_instance_load_placeholder(&mut self, load_placeholder: bool)

pub fn get_scene_instance_load_placeholder(&self) -> bool

pub fn set_editable_instance( &mut self, node: impl AsObjectArg<Node>, is_editable: bool, )

pub fn is_editable_instance(&self, node: impl AsObjectArg<Node>) -> bool

pub fn get_viewport(&self) -> Option<Gd<Viewport>>

pub fn queue_free(&mut self)

pub fn request_ready(&mut self)

pub fn is_node_ready(&self) -> bool

pub fn set_multiplayer_authority(&mut self, id: i32)

To set the default parameters, use Self::set_multiplayer_authority_ex and its builder methods. See the book for detailed usage instructions.

pub fn set_multiplayer_authority_ex<'a>( &'a mut self, id: i32, ) -> ExSetMultiplayerAuthority<'a>

pub fn get_multiplayer_authority(&self) -> i32

pub fn is_multiplayer_authority(&self) -> bool

pub fn get_multiplayer(&self) -> Option<Gd<MultiplayerApi>>

pub fn rpc_config(&mut self, method: impl AsArg<StringName>, config: &Variant)

pub fn set_editor_description( &mut self, editor_description: impl AsArg<GString>, )

pub fn get_editor_description(&self) -> GString

pub fn set_unique_name_in_owner(&mut self, enable: bool)

pub fn is_unique_name_in_owner(&self) -> bool

pub fn atr(&self, message: impl AsArg<GString>) -> GString

To set the default parameters, use Self::atr_ex and its builder methods. See the book for detailed usage instructions.

pub fn atr_ex<'a>(&'a self, message: impl AsArg<GString> + 'a) -> ExAtr<'a>

pub fn atr_n( &self, message: impl AsArg<GString>, plural_message: impl AsArg<StringName>, n: i32, ) -> GString

To set the default parameters, use Self::atr_n_ex and its builder methods. See the book for detailed usage instructions.

pub fn atr_n_ex<'a>( &'a self, message: impl AsArg<GString> + 'a, plural_message: impl AsArg<StringName> + 'a, n: i32, ) -> ExAtrN<'a>

pub fn rpc( &mut self, method: impl AsArg<StringName>, varargs: &[Variant], ) -> Error

§Panics

This is a varcall method, meaning parameters and return values are passed as Variant. It can detect call failures and will panic in such a case.

pub fn try_rpc( &mut self, method: impl AsArg<StringName>, varargs: &[Variant], ) -> Result<Error, CallError>

§Return type

This is a varcall method, meaning parameters and return values are passed as Variant. It can detect call failures and will return Err in such a case.

pub fn rpc_id( &mut self, peer_id: i64, method: impl AsArg<StringName>, varargs: &[Variant], ) -> Error

§Panics

This is a varcall method, meaning parameters and return values are passed as Variant. It can detect call failures and will panic in such a case.

pub fn try_rpc_id( &mut self, peer_id: i64, method: impl AsArg<StringName>, varargs: &[Variant], ) -> Result<Error, CallError>

§Return type

This is a varcall method, meaning parameters and return values are passed as Variant. It can detect call failures and will return Err in such a case.

pub fn update_configuration_warnings(&mut self)

pub fn call_deferred_thread_group( &mut self, method: impl AsArg<StringName>, varargs: &[Variant], ) -> Variant

§Panics

This is a varcall method, meaning parameters and return values are passed as Variant. It can detect call failures and will panic in such a case.

pub fn try_call_deferred_thread_group( &mut self, method: impl AsArg<StringName>, varargs: &[Variant], ) -> Result<Variant, CallError>

§Return type

This is a varcall method, meaning parameters and return values are passed as Variant. It can detect call failures and will return Err in such a case.

pub fn set_deferred_thread_group( &mut self, property: impl AsArg<StringName>, value: &Variant, )

pub fn notify_deferred_thread_group(&mut self, what: i32)

pub fn call_thread_safe( &mut self, method: impl AsArg<StringName>, varargs: &[Variant], ) -> Variant

§Panics

This is a varcall method, meaning parameters and return values are passed as Variant. It can detect call failures and will panic in such a case.

pub fn try_call_thread_safe( &mut self, method: impl AsArg<StringName>, varargs: &[Variant], ) -> Result<Variant, CallError>

§Return type

This is a varcall method, meaning parameters and return values are passed as Variant. It can detect call failures and will return Err in such a case.

pub fn set_thread_safe( &mut self, property: impl AsArg<StringName>, value: &Variant, )

pub fn notify_thread_safe(&mut self, what: i32)

pub fn notify(&mut self, what: NodeNotification)

⚠️ Sends a Godot notification to all classes inherited by the object.

Triggers calls to on_notification(), and depending on the notification, also to Godot’s lifecycle callbacks such as ready().

Starts from the highest ancestor (the Object class) and goes down the hierarchy. See also Godot docs for Object::notification().

§Panics

If you call this method on a user-defined object while holding a GdRef or GdMut guard on the instance, you will encounter a panic. The reason is that the receiving virtual method on_notification() acquires a GdMut lock dynamically, which must be exclusive.

pub fn notify_reversed(&mut self, what: NodeNotification)

⚠️ Like Self::notify(), but starts at the most-derived class and goes up the hierarchy.

See docs of that method, including the panics.

Methods from Deref<Target = Object>§

pub fn get_class(&self) -> GString

pub fn is_class(&self, class: impl AsArg<GString>) -> bool

pub fn set(&mut self, property: impl AsArg<StringName>, value: &Variant)

pub fn get(&self, property: impl AsArg<StringName>) -> Variant

pub fn set_indexed( &mut self, property_path: impl AsArg<NodePath>, value: &Variant, )

pub fn get_indexed(&self, property_path: impl AsArg<NodePath>) -> Variant

pub fn get_property_list(&self) -> Array<Dictionary>

pub fn get_method_list(&self) -> Array<Dictionary>

pub fn property_can_revert(&self, property: impl AsArg<StringName>) -> bool

pub fn property_get_revert(&self, property: impl AsArg<StringName>) -> Variant

pub fn set_script(&mut self, script: &Variant)

pub fn get_script(&self) -> Variant

pub fn set_meta(&mut self, name: impl AsArg<StringName>, value: &Variant)

pub fn remove_meta(&mut self, name: impl AsArg<StringName>)

pub fn get_meta(&self, name: impl AsArg<StringName>) -> Variant

To set the default parameters, use Self::get_meta_ex and its builder methods. See the book for detailed usage instructions.

pub fn get_meta_ex<'a>( &'a self, name: impl AsArg<StringName> + 'a, ) -> ExGetMeta<'a>

pub fn has_meta(&self, name: impl AsArg<StringName>) -> bool

pub fn get_meta_list(&self) -> Array<StringName>

pub fn add_user_signal(&mut self, signal: impl AsArg<GString>)

To set the default parameters, use Self::add_user_signal_ex and its builder methods. See the book for detailed usage instructions.

pub fn add_user_signal_ex<'a>( &'a mut self, signal: impl AsArg<GString> + 'a, ) -> ExAddUserSignal<'a>

pub fn has_user_signal(&self, signal: impl AsArg<StringName>) -> bool

pub fn remove_user_signal(&mut self, signal: impl AsArg<StringName>)

pub fn emit_signal( &mut self, signal: impl AsArg<StringName>, varargs: &[Variant], ) -> Error

§Panics

This is a varcall method, meaning parameters and return values are passed as Variant. It can detect call failures and will panic in such a case.

pub fn try_emit_signal( &mut self, signal: impl AsArg<StringName>, varargs: &[Variant], ) -> Result<Error, CallError>

§Return type

This is a varcall method, meaning parameters and return values are passed as Variant. It can detect call failures and will return Err in such a case.

pub fn call( &mut self, method: impl AsArg<StringName>, varargs: &[Variant], ) -> Variant

§Panics

This is a varcall method, meaning parameters and return values are passed as Variant. It can detect call failures and will panic in such a case.

pub fn try_call( &mut self, method: impl AsArg<StringName>, varargs: &[Variant], ) -> Result<Variant, CallError>

§Return type

This is a varcall method, meaning parameters and return values are passed as Variant. It can detect call failures and will return Err in such a case.

pub fn call_deferred( &mut self, method: impl AsArg<StringName>, varargs: &[Variant], ) -> Variant

§Panics

This is a varcall method, meaning parameters and return values are passed as Variant. It can detect call failures and will panic in such a case.

pub fn try_call_deferred( &mut self, method: impl AsArg<StringName>, varargs: &[Variant], ) -> Result<Variant, CallError>

§Return type

This is a varcall method, meaning parameters and return values are passed as Variant. It can detect call failures and will return Err in such a case.

pub fn set_deferred( &mut self, property: impl AsArg<StringName>, value: &Variant, )

pub fn callv( &mut self, method: impl AsArg<StringName>, arg_array: &Array<Variant>, ) -> Variant

pub fn has_method(&self, method: impl AsArg<StringName>) -> bool

pub fn get_method_argument_count(&self, method: impl AsArg<StringName>) -> i32

pub fn has_signal(&self, signal: impl AsArg<StringName>) -> bool

pub fn get_signal_list(&self) -> Array<Dictionary>

pub fn get_signal_connection_list( &self, signal: impl AsArg<StringName>, ) -> Array<Dictionary>

pub fn get_incoming_connections(&self) -> Array<Dictionary>

pub fn connect( &mut self, signal: impl AsArg<StringName>, callable: &Callable, ) -> Error

To set the default parameters, use Self::connect_ex and its builder methods. See the book for detailed usage instructions.

pub fn connect_ex<'a>( &'a mut self, signal: impl AsArg<StringName> + 'a, callable: &'a Callable, ) -> ExConnect<'a>

pub fn disconnect( &mut self, signal: impl AsArg<StringName>, callable: &Callable, )

pub fn is_connected( &self, signal: impl AsArg<StringName>, callable: &Callable, ) -> bool

pub fn set_block_signals(&mut self, enable: bool)

pub fn is_blocking_signals(&self) -> bool

pub fn notify_property_list_changed(&mut self)

pub fn set_message_translation(&mut self, enable: bool)

pub fn can_translate_messages(&self) -> bool

pub fn tr(&self, message: impl AsArg<StringName>) -> GString

To set the default parameters, use Self::tr_ex and its builder methods. See the book for detailed usage instructions.

pub fn tr_ex<'a>(&'a self, message: impl AsArg<StringName> + 'a) -> ExTr<'a>

pub fn tr_n( &self, message: impl AsArg<StringName>, plural_message: impl AsArg<StringName>, n: i32, ) -> GString

To set the default parameters, use Self::tr_n_ex and its builder methods. See the book for detailed usage instructions.

pub fn tr_n_ex<'a>( &'a self, message: impl AsArg<StringName> + 'a, plural_message: impl AsArg<StringName> + 'a, n: i32, ) -> ExTrN<'a>

pub fn is_queued_for_deletion(&self) -> bool

pub fn cancel_free(&mut self)

pub fn notify(&mut self, what: ObjectNotification)

⚠️ Sends a Godot notification to all classes inherited by the object.

Triggers calls to on_notification(), and depending on the notification, also to Godot’s lifecycle callbacks such as ready().

Starts from the highest ancestor (the Object class) and goes down the hierarchy. See also Godot docs for Object::notification().

§Panics

If you call this method on a user-defined object while holding a GdRef or GdMut guard on the instance, you will encounter a panic. The reason is that the receiving virtual method on_notification() acquires a GdMut lock dynamically, which must be exclusive.